Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

With only solar/car charging input, can WAVE 2 operate for cooling or heating?

Due to insufficient car charging power and unstable solar panel power,only Fan mode is available when they are used as the sole power supply,

Do I need to clean the WAVE 2 filters manually?

Yes. The air inlet may get blocked with large dust particles and impurities in the air during outdoor use, affecting the effect of cooling/heating. Regularly remove the front and rear air inlet filters, clean them with a damp cloth using a mild detergent, dry them in the air, and then reassemble them.

What if the inside of WAVE 2 is full of water?

WAVE 2 supports auto-shutdown with full water. When the water level indication shows full, the device switches to Fan mode if it is in Cooling mode, and automatically shuts down if it is in Heating mode. The prompts will show up in the app or on the LCD display. Please connect the device to the drain pipe. Use the app or press and hold the fan speed button to enable the external drainage function, or drain the residual water in the water tank via manual drainage.

How many exhaust ducts does the WAVE 2 provide? How do I use them?

This product comes with two exhaust ducts. When the air conditioner is used in an enclosed space, you can get rid of waste air through the exhaust ducts. When the interior space is small or noise avoidance is required, WAVE 2 can be placed outdoors and deliver cooling or heating through the front air outlet.

Can I use the air conditioner while charging?

It can be used while charging. But when only the car charger/solar panel is charging, the output power may be less than the operating power of the compressor and thus it will be impossible to charge the battery.

Contact us