Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

What modes does Wave have?

1. Cooling Mode - Powerful 4000BTU cooling using the inverter compressor. 2. Eco Mode - Choose between low, medium and high settings. Eco Mode intelligently switches between fan and cooling settings to extend run times beyond what would usually be possible. The app will give you an estimated run time so you’ve got peace of mind you’ll stay cool. 3. Timer Mode - Set EcoFlow Wave to run for a predetermined time. The unit will automatically turn off after your timer ends. 4. Fan Mode - Use EcoFlow Wave in fan mode to keep air circulation high without using as much energy.

How to Charge the Add-on Battery

1.Car charger (XT60 port) 2.Solar panel (XT60 port) 3.EcoFlow Alternator Charger (XT60/XT150)

How to Charge the Add-on Battery

1.Car charger (XT60 port) 2.Solar panel (XT60 port) 3.EcoFlow Alternator Charger (XT60/XT150)

WAVE 3 Won’t Turn On – How to Fix?

1.Check power connection: Plug it into a shore power outlet first. If it starts, the battery was fully drained. 2.Low battery discharging limit: If the battery is below the discharging limit, plug it in to charge. Optional: Set the discharging limit to 0% in settings. This gives you 1 extra minute of runtime before shutdown. 3.Future improvement: A firmware update will soon improve low-battery handling for smoother operation. Still stuck? Contact support for help! 😊

How to Drain Water Properly

1.Hold the Drainage Button for 3 seconds to start auto-draining. After draining, remove the tube and tilt the device backward slightly to remove leftover water.

Contact us