Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Does EcoFlow RIVER 3 / RIVER 3 Plus support simultaneous solar and AC charging?

Yes, the charging priority can be adjusted in the app. 1. By default, AC charging takes priority, but you can change the priority via the app. 2. When both AC and solar inputs are connected, AC charging will take priority. The solar panel will charge at its maximum power, and the AC will supplement any additional power needed to fully charge the battery.

How many solar panels can EcoFlow RIVER 3 / RIVER 3 Plus use, and what is the solar charging power?

You need to check the parameters and configuration of the connected solar panels to ensure the total power is within the acceptable range of the portable power station's specifications. Exceeding these limits could damage the portable power station. Refer to the user manual to confirm the solar input specifications, including: a. voltage range; b. maximum current; c. maximum power. The combination of solar panels must meet the following conditions: 1. Voltage: The open-circuit voltage of the solar panel must fall within the voltage range of the portable power station ①; 2. Current: The maximum current of the solar panels ≤ the maximum current of the portable power station ②; 3. Power: The maximum power of the solar panels ≤ the maximum power of the portable power station ③. All three conditions must be met; exceeding any one of them means the solar panels cannot be used. There are two connection methods: series and parallel. ① In series, the voltage adds up while the current is limited by the panel with the lowest current; ② In parallel, the current adds up while the voltage is limited by the panel with the smallest voltage. (If the portable power station has overcurrent protection, the current will be limited to the device’s maximum input current). EcoFlow RIVER 3 solar input specifications: Voltage range 11~30V, maximum current 8A, maximum power 110W. For 45W solar panels: Series: Maximum 1 panel. Parallel: Maximum 3 panels. For 60W solar panels: Series: Maximum 1 panel. Parallel: Maximum 2 panels. EcoFlow RIVER 3 Plus solar input specifications: Voltage range 11~50V, maximum current 13A, maximum power 220W. For 45W solar panels: Series: Maximum 2 panels. Parallel: Maximum 4 panels. For 60W solar panels: Series: Maximum 2 panels. Parallel: Maximum 3 panels.

What modes does Wave have?

1. Cooling Mode - Powerful 4000BTU cooling using the inverter compressor. 2. Eco Mode - Choose between low, medium and high settings. Eco Mode intelligently switches between fan and cooling settings to extend run times beyond what would usually be possible. The app will give you an estimated run time so you’ve got peace of mind you’ll stay cool. 3. Timer Mode - Set EcoFlow Wave to run for a predetermined time. The unit will automatically turn off after your timer ends. 4. Fan Mode - Use EcoFlow Wave in fan mode to keep air circulation high without using as much energy.

Can the battery be installed on its side?

It is recommended to install this battery upright, with the positive and negative terminals perpendicular to the horizontal surface.

What is the difference between the EcoFlow 12V 100Ah Lithium Trolling Motor Battery and the EcoFlow 12V 100Ah Lithium Battery?

The EcoFlow 12V 100Ah Lithium Trolling Motor Battery can deliver a peak discharging current of 300A for 30 seconds and sustain 150A (1.5C) discharge for around 10 minutes. The EcoFlow 12V 100Ah Lithium Battery can deliver a peak discharging current of 110A for 30 seconds and sustain 100A (1C) discharge. In short, the EcoFlow 12V 100Ah Lithium Trolling Motor Battery offers a higher peak discharging current and the ability to discharge 150A (1.5C) for approximately 10 minutes.

Contact us