Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
No, this is because the car charging and solar charging cables share the same input (XT60 outlet).
Yes, we recommend connecting 2 same units in series at most. Furthermore, please also note: 1. The slave unit must be fully charged before being connected. 2. Must not charge the main unit when the slave is connected.
Yes, but please note: - The transfer switch should be connected to the power station's AC output port; - You should disconnect the circuits from the grid before they are supported by the power station; - The total power consumption of the circuits should not exceed the output power rating; - The output will not be grounded if the power station is not connected to the grid.
1. If DELTA Max is placed on a carpet, move it to a wooden floor or solid flooring. 2. Take a video showing the error and contact support.eu@ecoflow.com
When the car is out of power, you can use a dedicated jumper cable to charge the battery in around 15-20 minutes. Jumper cables are sold separately from a third party. (Note: When charging, do not start the car otherwise, it will cause the battery to malfunction)