Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
There are 3 ways to drain WAVE 2: 1. In cooling mode, it has a no-drain function, which means that condensation evaporates through flash distillation, without the need of draining it outside. When the ambient humidity is too high, condensation cannot evaporate completely, so the following two ways of drainage are required. 2. External circulation drainage: After opening the external circulation drainage function through app control or by long pressing the wind speed button, WAVE 2 can automatically detect the internal water volume when working and drain it through the pump. It has 1m head and can be connected to the water pipe for drainage. 3. Manual drainage: A small amount of residual water may be left in water tank after WAVE 2 has finished working. Please remove the plug at the bottom of the product to drain the residual water.
Yes.After the work of WAVE 2 is finished, a small amount of residual water may be left in water tank after WAVE 2 has finished working. In order to prevent bacteria breeding in the damp or accidental overflow of water, we recommend manual drainage after each use and before moving the product. Please remove the plug at the bottom and tilt the product to drain the residual water.
Drain-free means that in cooling mode, when the ambient humidity is lower than 70%, there is no need for manual drainage during use.No matter in which mode, there will still be a small amount of residual water left in water tank after WAVE 2 has finished working. Therefore, we recommend manual drainage following the instructions in the user manual each time after use and before moving the product.When the ambient humidity exceeds 70%, even if the drain-free function is on, the condensation inside WAVE 2 cannot completely evaporate, which may trigger the overflow shutdown protection. In this case, perform external circulation drainage or manual drainage according to the instructions in the user manual.
Yes.After the work of WAVE 2 is finished, a small amount of residual water may be left in water tank after WAVE 2 has finished working. In order to prevent bacteria breeding in the damp or accidental overflow of water, we recommend manual drainage after each use and before moving the product. Please remove the plug at the bottom and tilt the product to drain the residual water.
Drain-free means that in cooling mode, when the ambient humidity is lower than 70%, there is no need for manual drainage during use.No matter in which mode, there will still be a small amount of residual water left in water tank after WAVE 2 has finished working. Therefore, we recommend manual drainage following the instructions in the user manual each time after use and before moving the product.When the ambient humidity exceeds 70%, even if the drain-free function is on, the condensation inside WAVE 2 cannot completely evaporate, which may trigger the overflow shutdown protection. In this case, perform external circulation drainage or manual drainage according to the instructions in the user manual.