Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

What is the maximum solar input that EcoFlow DELTA Pro 3 can support?

EcoFlow DELTA Pro 3 has two PV input ports, which are for high-voltage PV port and low-voltage PV, respectively. High-voltage PV: 30-150V, 15A Max, 1600W Max. Low-voltage PV: 11-60V, 20A Max, 1000W Max. The maximum solar input for the EcoFlow DELTA Pro 3 is 2600W. Please note that this value is based on experimental results under optimal conditions. Achieving this maximum input may require the use of higher-power solar panels that are within the product’s voltage tolerance but exceed the PV port’s power limit. Actual solar input performance can vary depending on the solar panels used, environmental factors, and system configuration. For more information on designing your own solar setup, please contact EcoFlow Customer Service. Before performing any installation, please ensure that it is carried out by a qualified and certified professional.

What is the maximum solar input that EcoFlow DELTA Pro 3 can support?

EcoFlow DELTA Pro 3 has two PV input ports, which are for high-voltage PV port and low-voltage PV, respectively. High-voltage PV: 30-150V, 15A Max, 1600W Max. Low-voltage PV: 11-60V, 20A Max, 1000W Max.

How to reset the Bluetooth and Wi-Fi connections on EcoFlow DELTA Pro 3?

When the device is powered off, press and hold the power button for more than 5 seconds. The device's LCD screen will light up, and then the screen will blink once (it must blink once), indicating that the Bluetooth connection has been successfully reset.

Can the EcoFlow DELTA Pro 3 Smart Extra Battery andthe EcoFlow DELTA Pro Smart Extra Battery be mixed and plugged into the EcoFlow DELTA Pro 3?

Supported. However, due to the different capacities of the EcoFlow DELTA Pro Extra Battery and the EcoFlow DELTA Pro 3 Extra Battery, there will be some SOC imbalance.

Is the EcoFlow DELTA Pro Smart Extra Battery compatiblewith the DELTA Pro 3?

Yes, supported. Please note that all devices need to be upgraded to the latest firmware version to ensure compatibility.

Contact us