Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Does EcoFlow RIVER 3 / RIVER 3 Plus support simultaneous solar and AC charging?

Yes, the charging priority can be adjusted in the app. 1. By default, AC charging takes priority, but you can change the priority via the app. 2. When both AC and solar inputs are connected, AC charging will take priority. The solar panel will charge at its maximum power, and the AC will supplement any additional power needed to fully charge the battery.

How long does it take to charge EcoFlow RIVER 3?

AC charging: It charges from 0% to 80% in as fast as 43 minutes, and from 0% to 100% in 60 minutes. Car charging: It charges from 0% to 80% in as fast as 2.1 hours, and from 0% to 100% in 2.8 hours. Solar charging: It charges from 0% to 80% in as fast as 2.3 hours, and from 0% to 100% in 2.6 hours. *These figures are based on laboratory testing data, and actual charging duration may vary depending on environmental conditions.

Is EcoFlow RIVER 3 / RIVER 3 Plus waterproof?

The battery cells and BMS in EcoFlow RIVER 3 and RIVER 3 Plus support IP54 protection, providing extra peace of mind during use. However, the entire product is not waterproof.

How many solar panels can EcoFlow RIVER 3 / RIVER 3 Plus use, and what is the solar charging power?

You need to check the parameters and configuration of the connected solar panels to ensure the total power is within the acceptable range of the portable power station's specifications. Exceeding these limits could damage the portable power station. Refer to the user manual to confirm the solar input specifications, including: a. voltage range; b. maximum current; c. maximum power. The combination of solar panels must meet the following conditions: 1. Voltage: The open-circuit voltage of the solar panel must fall within the voltage range of the portable power station ①; 2. Current: The maximum current of the solar panels ≤ the maximum current of the portable power station ②; 3. Power: The maximum power of the solar panels ≤ the maximum power of the portable power station ③. All three conditions must be met; exceeding any one of them means the solar panels cannot be used. There are two connection methods: series and parallel. ① In series, the voltage adds up while the current is limited by the panel with the lowest current; ② In parallel, the current adds up while the voltage is limited by the panel with the smallest voltage. (If the portable power station has overcurrent protection, the current will be limited to the device’s maximum input current). EcoFlow RIVER 3 solar input specifications: Voltage range 11~30V, maximum current 8A, maximum power 110W. For 45W solar panels: Series: Maximum 1 panel. Parallel: Maximum 3 panels. For 60W solar panels: Series: Maximum 1 panel. Parallel: Maximum 2 panels. EcoFlow RIVER 3 Plus solar input specifications: Voltage range 11~50V, maximum current 13A, maximum power 220W. For 45W solar panels: Series: Maximum 2 panels. Parallel: Maximum 4 panels. For 60W solar panels: Series: Maximum 2 panels. Parallel: Maximum 3 panels.

What is the standby power consumption for EcoFlow RIVER 3 / RIVER 3 Plus?

EcoFlow RIVER 3: AC standby power consumption ≤ 4W, DC standby power consumption ≤ 2W. EcoFlow RIVER 3 Plus: AC standby power consumption ≤ 5.5W, DC standby power consumption ≤ 2.3W.

Contact us