Welcome to EcoFlow Support

We're here for you

EcoFlow STREAM 5000

EcoFlow STREAM Expansion Battery 5000

EcoFlow STREAM AC 5000

EcoFlow DELTA 2 Max

EcoFlow DELTA 3 Max Plus (2048Wh)

DELTA 3 Classic (1024Wh)

DELTA 3 Ultra (3072Wh)

DELTA 3 Ultra Plus (3072Wh)

EcoFlow DELTA 3 Max (2048Wh)

EcoFlow DELTA 3 1000 Air

EcoFlow DELTA 3 2000 Air

EcoFlow RAPID Magnetic Power Bank

EcoFlow TRAIL Plus 300 DC

EcoFlow TRAIL 300 DC

EcoFlow TRAIL 200 DC

EcoFlow RAPID Pro 3-in-1 Power Bank (10,000mAh, 67W)

EcoFlow RAPID Power Bank (25,000mAh, 170W)

EcoFlow RAPID Pro Power Bank (27,650mAh, 300W, 140W Built-in Cable)

EcoFlow RAPID Pro Power Bank (20,000mAh, 230W, 100W Built-in Cable)

EcoFlow DELTA Pro 3

EcoFlow DELTA Pro

EcoFlow DELTA 2

EcoFlow 100W Flexible Solar Panel

EcoFlow 60W Portable Solar Panel

EcoFlow 110W Portable Solar Panel

Alternator Charger (800W)

EcoFlow DELTA 3

EcoFlow RIVER 3 Plus

EcoFlow RIVER 3

EcoFlow RIVER 2 Pro

EcoFlow RIVER 2

Lithium 12V 100Ah Deep Cycle Marine Trolling Motor Battery

EcoFlow WAVE 2

EcoFlow GLACIER

EcoFlow RIVER 2 Max

EcoFlow 400W Portable Solar Panel

EcoFlow 45W Portable Solar Panel

EcoFlow NextGen 160W Portable Solar Panel

EcoFlow NextGen 220W Portable Solar Panel

Home

Support

FAQ

Portable Power Stations

FAQ

Portable Power Stations

What kind of wall charger is needed for Ecoflow TRAIL Portable Power Station?

Use any 9V or above USB-C PD charger for the Ecoflow TRAIL Portable Power Station. For full-speed charging, 220W (140W, 100W) or 280W (2*140W) total charging ports are required.

How to turn on low current mode

1. Connect a low-power device to the USB-A port 2. Double-click the multi-function button. When the USB-A port flashes, low-current mode is enabled 3. Low-current mode will last for 3 hours. You can double-click to exit early

Common error/failure handling methods

High temperature protection: Please stop using the product and move it to a well-ventilated location away from heat sources. The alarm will automatically disappear after the product temperature returns to normal levels. Low temperature protection: Please move the product to a warmer location. The alarm will automatically disappear after the product temperature returns to normal levels. USB-C1 output overload: Please remove the device connected to the USB-C1 interface. Wait for the alarm to automatically disappear before trying again. USB-C2 output overload: Please remove the device connected to the USB-C2 interface. Wait for the alarm to automatically disappear before trying again. USB-A output overload: Please remove the device connected to the USB-A interface. Wait for the alarm to automatically disappear before trying again. Car charger output overload: Please remove the device connected to the car charger output port. Wait for the alarm to automatically disappear before trying again. If the reported fault cannot be resolved after attempting above methods, please contact our customer service for further assistance with after-sales processing.

What material is the battery of the device made of?

LiFePO4

Can the product be brought on board an airplane?

No, the battery capacity of the product is greater than the airplane limit of 160Wh

Contact us

Email Us