Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
USB-C interface: PD2.0, PD3.0, QC2.0, QC3.0 USB-A interface: BC1.2 USB-A fast charging port: BC1.2, QC3.0, QC2.0 It is recommended to use a compatible USB charging cable to charge your electronic device. If the cable or device does not support the corresponding protocol, the maximum output power may not be obtained.
All support; X-Stream: Fully charged in 56 minutes. X-boost: Supported, but the Xboost power varies slightly in different regions. The Xboost power in different regions is as follows Voltage in Japan: 100V; XBoost power: 2000W Europe/UK/South Africa voltage: 230V; XBoost power: 2400W Voltage in China: 220V; XBoost power: 2200W Taiwan voltage: 110V; XBoost power: 2500W Korean regional voltage: 220V; XBoost power: 2200W Voltage in Switzerland/Australia: 230V; XBoost power: 2400W Voltage in US-regulated areas: 120V; XBoost power: 2600W Note: When the device is connected to the AC input, X-Boost is not available (for example, the power supply is charging or in bypass mode). Bypass mode: When charging and discharging the device at the same time (through the AC input and output ports), the device will automatically enable bypass mode.
AC-AC:100% AC-DC:90% DC-AC:92% DC-DC:94%
Yes, but it is recommended to stack only one power pack because the device only has one XT150 interface. It is recommended to place only one power pack
Delta 3 or Delta 3 Plus can charge devices through the AC input port, XT60 input port, and XT150 port. It supports connecting multiple input sources simultaneously and has the following charging priorities. EcoFlow Micro Inverter (via XT150 port) > Solar (via XT60 port) > AC power (AC input port, including grid power and generator (Smart Generator 3000 (Dual Fuel))) > EcoFlow Smart Generator (input via XT150 port (DG200, Smart Generator 4000 (Dual Fuel)) > EcoFlow driving fast charging (via XT150 port)