Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Battery care and storage

1. Please use or store the product in an environment temperature between 20°C to 30°C, away from water, heat, and other metal objects. 2. For long-term storage, please discharge the battery to 30% and recharge it to 60% every three months; products that have not been charged and discharged for more than 6 months will not be covered by the free product warranty. 3. For safety, please do not store the product in an environment temperature higher than 45°C or lower than -10°C for a long time. 4. To prolong the battery life, please use the product in an environment temperature between 20°C to 30°C.

Cannot find the router wifi at home

1. Press IOT Button again to try reconnecting with power station. 2. Use another phone hotpot as a router. If you can connect the device to the hotspot network, it means that your router Wi-Fi is not 2.4 GHz. In this case, you can modify the router setting.

Can I connect more than one power station together in series? (For all power stations)

Yes, we recommend connecting 2 same units in series at most. Furthermore, please also note: 1. The slave unit must be fully charged before being connected. 2. Must not charge the main unit when the slave is connected.

Can I connect EcoFlow power stations to my house electric panel directly? (For all power stations)

Yes, but please note: - The transfer switch should be connected to the power station's AC output port; - You should disconnect the circuits from the grid before they are supported by the power station; - The total power consumption of the circuits should not exceed the output power rating; - The output will not be grounded if the power station is not connected to the grid.

How to store and maintain Ecoflow power station

1. To prolong the battery life, we recommend that you use and store the product in an environment of 20°C to 30°C, away from water, heat, and metal objects. 2. For long-term storage, discharge the product down to 30% and then charge it up to 60%. Continue to follow this procedure every 3 months. Units that are not charged and discharged for more than 6 months will no longer be covered under warranty. 3. For safety reasons, please do not store this product in an environment above 45°C or below -10°C over a long period.

Contact us