Welcome to EcoFlow Support

We're here for you

EcoFlow STREAM 5000

EcoFlow STREAM Expansion Battery 5000

EcoFlow STREAM AC 5000

EcoFlow DELTA 2 Max

EcoFlow DELTA 3 Max Plus (2048Wh)

DELTA 3 Classic (1024Wh)

DELTA 3 Ultra (3072Wh)

DELTA 3 Ultra Plus (3072Wh)

EcoFlow DELTA 3 Max (2048Wh)

EcoFlow DELTA 3 1000 Air

EcoFlow DELTA 3 2000 Air

EcoFlow RAPID Magnetic Power Bank

EcoFlow TRAIL Plus 300 DC

EcoFlow TRAIL 300 DC

EcoFlow TRAIL 200 DC

EcoFlow RAPID Pro 3-in-1 Power Bank (10,000mAh, 67W)

EcoFlow RAPID Power Bank (25,000mAh, 170W)

EcoFlow RAPID Pro Power Bank (27,650mAh, 300W, 140W Built-in Cable)

EcoFlow RAPID Pro Power Bank (20,000mAh, 230W, 100W Built-in Cable)

EcoFlow DELTA Pro 3

EcoFlow DELTA Pro

EcoFlow DELTA 2

EcoFlow 100W Flexible Solar Panel

EcoFlow 60W Portable Solar Panel

EcoFlow 110W Portable Solar Panel

Alternator Charger (800W)

EcoFlow DELTA 3

EcoFlow RIVER 3 Plus

EcoFlow RIVER 3

EcoFlow RIVER 2 Pro

EcoFlow RIVER 2

Lithium 12V 100Ah Deep Cycle Marine Trolling Motor Battery

EcoFlow WAVE 2

EcoFlow GLACIER

EcoFlow RIVER 2 Max

EcoFlow 400W Portable Solar Panel

EcoFlow 45W Portable Solar Panel

EcoFlow NextGen 160W Portable Solar Panel

EcoFlow NextGen 220W Portable Solar Panel

FAQ

DELTA Series

How to Upgrade DELTA Max's Firmware

1. Long press the IoT button under the screen for 3 seconds, and the WiFi icon on the screen will flash. After confirming that DELTA Max's WiFi is on, connect your phone to the unit. 2. Open the app and click the "+" in the upper right corner to add a device. Connect to the WIFI or a mobile phone hotspot. Go to the DELTA Max page, then Settings>Firmware>Update. 3. If you can't find the "Upgrade" reminder, it means that your home router is not connected. Press and hold the IoT button under the DELTA Max's screen for 3 seconds to reconnect. 4. Upgrading won't be complete if it is interrupted. Restart DELTA Max, reconnect the WiFi and DELTA Max, then update again. 5. If you can't update using the app or there is still a failure after updating, contact support.eu@ecoflow.com.

Using EPS Mode

DELTA Max supports EPS (Emergency Power Supply). When DELTA Max is plugged into the grid to charge using AC, any load plugged into the DELTA Max will be directly powered from the grid and not DELTA Max. If there is a power outage, DELTA Max automatically switches to its battery supply mode within 30 milliseconds. Any device plugged into the DELTA Max will have no power for 30 milliseconds, making it unsuitable for desktop computers or data servers which must be reconnected to power within 0 milliseconds (UPS). UPS is unnecessary for all devices, and we advise testing yourself before using the EPS function. It is recommended that only one device is plugged into DELTA Max to avoid overloading.

Charging and discharging with the Extra Battery

When charging/discharging, the BMS will charge the one with low voltage first. It will then balance the charge in the two units before charging/discharging further.

Using the Smart Generator

The EcoFlow Smart Generator can charge DELTA Max (up to 1800W), expanding the capacity (up to 2x5.4kWh) and extending the power supply time. When the Smart Generator is connected to DELTA Max and battery capacity is less than 20% (can be set in the app), the Smart Generator will automatically start topping up the battery.

DELTA Max Maintenance and Storage

1. To prolong the battery life, we recommend that you use and store DELTA Max in an environment of 20°C to 30°C, away from water, heat, and metal objects. 2. For long-term storage, discharge the product down to 30% and then charge it up to 60%. Continue to follow this procedure every 3 months. Units that are not charged and discharged for more than 6 months will no longer be covered under warranty. 3. For safety reasons, please do not store this product in an environment above 45°C or below -10°C over a long period.

Contact us

Email Us