Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
1. Long press the IoT button under DELTA Max’s screen for 3 seconds until the WiFi icon flashes and the DELTA Max’s WiFi is turned on. 2. With the mobile phone near DELTA Max, search for the WiFi signal starting with """"EcoFlow"""" or """"DELTA Max"""" and follow the prompts to connect. 3. If you cannot find DELTA Max's signal, you can restart DELTA Max or try with another mobile phone. 4. If none of the above methods work, please provide the serial number photo at the bottom of the device and contact the support.eu@ecoflow.com
1. Press the IoT button again to reconnect. 2. Use another mobile phone to set up a hotspot connection. If the DELTA Max can connect to the phone's hotspot connection, it means that the connection function of the DELTA Max is normal. Since the WIFI connection only supports 2.4GHz, check the home router. If it is 2.4 GHz, modify the router configuration. 3. If none of the above methods work, provide a photo of the serial number at the bottom of the device and contact support.eu@ecoflow.com
When unable to connect to the unit, the serial number is not displayed, or "Unknown" appears after binding; the serial number has not been confirmed. Please contact support.eu@ecoflow.com
Perform three times SoC calibration by doing three complete charges and discharges.
This product has X-Boost enabled by default. You can use the EcoFlow app to turn this function on or off. X-Boost is not available in the following situations: (1) the AC output is turned on in the charging state (in bypass mode) and (2) the X-Boost mode is turned off. X-Boost is more suitable for heating and electrical equipment, but not for all electrical appliances. Some electrical appliances equipped with voltage protection (such as precision instruments, etc.) are not suitable for X-Boost. To confirm whether the device is compatible with X-Boost, please refer to the actual test.