Electricity Costs Per State Map: Compare Prices Across the U.S.
Electricity prices vary much more than you realize from one state to another. For example, households in Hawaii pay over 3 times more per kilowatt-hour than those in Nevada for roughly the same usage. Below we will show how residential electricity costs vary by state across the U.S., explain why prices differ, plus ways to keep your monthly bill down.
How Do Electricity Costs Compare Across the U.S.?
Electricity rates vary significantly across the country. When comparing electricity cost by state, look at both regional averages and individual state rates.
What Does the Electricity Costs Per State Map Reveal?
Looking at a state-by-state pricing comparison shows that there are some regional areas with similar pricing rather than random price swings. The Northeast, California, Alaska, and Hawaii stand out as high-cost regions, where households routinely pay well above the national average of 18.16 cents per kWh. Meanwhile, a broad band of states across the Pacific Northwest, Rocky Mountains, Great Plains, and South Central region enjoy much lower rates. Even neighboring states can have a noticeable difference. For example, Colorado averages 17.17 cents per kWh, while neighboring Utah averages just 13.31 cents—well below the national average.
Average Residential Electricity Rates by State
The table below shows where many states stand compared to the U.S. average of 18.16¢/kWh. This is based on U.S. Energy Information Administration data for August 2026.
State | Avg. Residential Rate (¢/kWh) | Comparison to U.S. Avg. (18.16¢) |
Hawaii | 47.18¢ | +160% |
Maine | 32.11¢ | +77% |
Massachusetts | 30.48¢ | +68% |
California | 29.75¢ | +64% |
Alaska | 29.41¢ | +62% |
New York | 28.65¢ | +58% |
Illinois | 19.32¢ | +6% |
Texas | 15.91¢ | -12% |
Florida | 14.99¢ | -17% |
Washington | 14.63¢ | -19% |
North Dakota | 13.31¢ | -27% |
Utah | 13.31¢ | -27% |
Louisiana | 12.87¢ | -29% |
Nevada | 12.72¢ | -30% |
Where Do Electricity Costs Rank Highest and Lowest?
Some states pay more than three times as much per kWh as others. The higher rates will make a big difference in the average electric bill when using high demand appliances like air conditioning or electric heating.
States With the Highest Electricity Prices
Hawaii tops the nation at 47.18¢/kWh, largely because Hawaii island utilities rely on shipped-in fuel products for power generation. In the continental U.S., New England states dominate the top tier for high utility rates. Maine’s average rate is 32.11¢/kWh, Massachusetts is 30.48¢/kWh, Rhode Island is 28.18¢/kWh, and New Hampshire is 27.64¢/kWh. All these are well above the national average. The next highest grouping includes California with an average rate of 29.75¢/kWh, Alaska 29.41¢/kWh, and New York with 28.65¢/kWh. These higher electricity rates can translate into significantly higher monthly utility bills, even for households with relatively moderate electricity consumption.
States With the Lowest Electricity Prices
On the other end of the spectrum, Nevada has the lowest average residential electricity rate in the country at 12.72¢/kWh, followed by Louisiana at 12.87¢/kWh. Utah and North Dakota are tied at 13.31¢/kWh, while Idaho averages 13.37¢/kWh and Tennessee 13.42¢/kWh. Washington State also has a rate well below the national average, at 14.63¢/kWh. Its abundant hydropower resources contribute to its electricity supply, with hydropower accounting for about 63% of the state’s total electricity generation in 2025. More broadly, the availability of low-cost generation sources such as hydropower and wind can help moderate electricity costs, although fuel prices, transmission and distribution expenses, and other factors also influence the rates consumers pay.


What Factors Affect Electricity Costs Across Different States?
The cost of electricity depends on more than how much power a state produces. Fuel costs, grid infrastructure, local weather, and utility regulations all play a part in what households pay.
Local Energy Sources and Electricity Generation Costs
How a state generates electricity is a major factor affecting residential electricity rates. States with lower generation costs include Washington and Idaho, which rely on large hydroelectric networks. Louisiana and Oklahoma have low-cost natural gas fields and can generate electricity for less. States that rely on transported fuels, such as pipeline natural gas, shipped liquefied natural gas, or imported oil, can face higher generation costs. When global fuel prices spike, the timing of the impact on residential rates depends on fuel purchasing arrangements and rate adjustment mechanisms. For households with suitable solar access, a solar battery can store locally generated electricity for later use.
Power Grid Infrastructure and Transmission Costs
Generating electricity is only half the equation. The power must also be transmitted safely across mountains, suburbs, and rural counties which costs billions. In California, utilities have spent heavily on undergrounding power lines to avoid wildfires. These costs are being passed on to customers through higher delivery charges. Across New England and the Mid-Atlantic, maintaining and upgrading century-old transmission lines adds a hefty delivery fee on top of basic energy supply charges.
Climate and Regional Electricity Demand
Regional weather patterns influence both household electricity consumption and overall grid demand. Extreme heat or cold can increase demand for cooling or electric heating, which can raise the cost of supplying electricity. Weather-driven demand is one reason households ask, “Why is my electricity bill so high?”
State Electricity Regulations and Pricing Policies
How a state structures its electricity market also affects residential rates. In regulated states like Florida or Georgia, state utility commissions oversee rates for a single regional utility. This usually results in steadier, more predictable pricing. In deregulated states, like Texas, Ohio, Pennsylvania, and Massachusetts, retail electric utility providers compete for your business. While competition lets savvy shoppers lock in promotional fixed-rate plans, variable plans in a deregulated market can result in sharp increases during extreme weather.


How Can You Reduce Your Household Electricity Costs?
You can’t change your state’s electricity rates, but you can reduce how much power you use and when you use it. Learning how to save money on an electric bill starts with reducing wasted energy and choosing efficient appliances.
For households on time-of-use plans, a home battery can shift some grid purchases to lower-price periods; savings depend on the tariff, system losses, and installation costs.
Adopt Energy-Saving Habits at Home
Small adjustments in your daily routine add up faster than most homeowners expect. Raising your thermostat by two or three degrees in summer or lowering it slightly in winter can reduce HVAC energy consumption without sacrificing comfort. Try running dishwashers, washing machines, and electric dryers after 9:00 PM when Time-of-Use (TOU) rates are much lower. Also, use smart power strips that eliminate phantom standby power drain from gaming consoles, TVs, and home office gear.
Upgrade to Energy-Efficient Appliances
Older appliances can increase your monthly electricity bill without you realizing it. A 15-year-old refrigerator in the garage can use twice as much electricity as a modern ENERGY STAR-certified model. Also, consider upgrading your water heater to a heat pump water heater. You can immediately lower your kWh consumption by replacing incandescent bulbs with LED bulbs, and sealing drafty attic ductwork and windows.
Consider Solar Panels and Battery Storage
For households in states with high utility rates, generating and storing your own solar energy cuts down how much electricity you have to buy from the grid. Combining solar panels with battery storage lets you store excess daytime solar energy for evening hours. If your utility uses Time-of-Use (TOU) pricing, a home battery also gives you the flexibility to shift when you draw power based on changing rates.
You can start with a smaller system for everyday essentials. This would be the EcoFlow DELTA 3 Classic Portable Power Station combined with a 160W solar panel. This system lets you capture solar energy for low-wattage gear like Wi-Fi routers, lamps, and laptops. Its 1,024Wh battery capacity provides stored power for small electronics, while solar charging offers an additional way to replenish the battery. With the EcoFlow app, you can easily schedule charging and discharging windows to fit your schedule.
For homeowners who already have, or plan to have, rooftop solar panels, the EcoFlow TITAN 5000 Plus can be part of a whole-home storage system. It supports up to 8kW of solar input and starts with a 5kWh base capacity that expands up to 30kWh. Storing midday solar power may reduce grid purchases during expensive periods, depending on the rate plan, system configuration, and household use. Connect it to the Smart Home Panel 10 to manage stored energy across 10 home circuits. AC coupling with an existing rooftop solar system requires the Smart Home Panel 10 (240V) and a CT sensor. The Smart Home Panel 10 must be installed indoors by a qualified electrician and connected downstream of the home’s main electrical panel. The TITAN 5000 Plus includes OASIS 3.0 energy management to schedule charging and discharging around utility rate periods.
Conclusion
Electricity prices vary widely across the U.S., so the same amount of electricity can cost much more in one state than another. You cannot control what your utility rates are, but you can adjust your household’s energy habits to lower monthly bills. Lower your bill by using more efficient appliances, shifting electricity use to cheaper hours, and considering solar panels or battery storage. If you live in a state with higher rates, these changes will make an even bigger difference over time.
FAQ
How Do You Calculate Your Monthly Electricity Bill?
Multiply your total monthly electricity usage (in kilowatt-hours) by your utility’s rate per kWh, then add fixed monthly delivery fees, taxes, and surcharges. For example, using 900 kWh at 18¢/kWh equals $162 in energy charges before basic service fees.
What Is the Difference Between Electricity Rates and Electricity Costs?
Your electricity rate is the price you pay per unit of energy (measured in cents per kWh), while your electricity cost is the total dollar amount on your monthly bill. A state with a low rate—like Louisiana—can still produce some of the highest summer bills in the country because hot, humid weather and older, less-insulated housing stock drive average monthly household usage well above the 900 kWh national norm.
Does Deregulated Electricity Cost Less Than Regulated Electricity?
Not automatically—deregulated markets give you the freedom to shop for competitive plans, while regulated markets often provide steadier average rates. Many of the nation’s highest-rate states in the Northeast are deregulated due to regional fuel and grid costs, whereas several low-cost states in the Southeast remain regulated.
How Often Do Electricity Rates Change?
It depends on your utility and plan type: Fixed-rate contracts in deregulated states often lock in your supply rate for around 6 to 36 months, depending on the provider and plan, while regulated utilities typically adjust rates once or twice a year after state commission reviews. If you’re on a variable or Time-of-Use plan, your rate can shift monthly—or even multiple times within a single day.
For press requests or interview opportunities, reach out to our media team
media.na@ecoflow.com