Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
Networking is not necessary. When using the app, you can control the device from a close range through Bluetooth or networking, or remotely control it by configuring the network for WAVE 2.
The device does not have a separate dehumidification mode. But the dehumidification function can be realized to a certain extent when the drain-free function is turned off and the external drainage is started.
1. Check that the mode and temperature are correctly configured. 2. Use the device within the operating temperature range. Lower ambient temperatures will lead to compromised heating effect. 3. Remove any blocking objects and make sure that the air inlet is more than 0.5 m away from walls. 4. Connect the device to the Ecoflow app and complete network setup. Then check for any firmware updates. 5. Refer to the user manual and use the device within the specified temperature range. 6. Check the device's heating effect after the protective shutdown period ends.
Get up to 8 hours cooling with Eco Mode. Just open the app, and select “Eco Mode”, then you’ll be prompted to pick low, medium or high settings. Select which you need for a preview of how long your Wave will run for. Then, it will automatically adjust and switch between cooling and fan modes in intervals to keep you cool for extended periods.
Yes, as long as the AC output is over 600W can power Wave.