Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Can I use other products to charge RIVER mini?

In addition to wall charging, car charging, and solar charging, other equipment such as generators or inverters can be used if they output 220–240V (50Hz/60Hz) of sine wave AC power. When charging RIVER mini, X-Stream needs the AC input power to be greater than 400W.

Does it support charging while using?

Yes, RIVER mini supports charging and discharging while charging from vehicles, solar panels, etc. However, when the battery of the machine is low or about to run out, it is best not to output while connecting to DC charging (solar/vehicle charging); at this time, if the input of the power is less than or equal to the output power, the device will continue to consume power, which may result in power loss and eventually damage the battery.

What is the battery cell type and chemistry of RIVER mini?

The battery types are: Cylindrical 21700, NCM batteries, 2 parallel 7 series, 14 batteries total.

Does RIVER mini have overcurrent protection for AC charging?

Yes, when the continuous current is greater than 10A, the switch button of overload charging automatically pops up, and the AC charging is disconnected. If there is no fault, press the switch to reset and resume charging.

Why wont my RIVER Pro charge my appliances/devices?

1. If it is charging from an AC outlet, confirm that the AC switch is turned on. The same goes for DC outlets. 2. If the AC or DC switch is turned on, and it still cannot be charged, please confirm whether the output power of the power station meets the wattage requirements of your device 3. When the power from a DC source and car charger is less than 1 watt, the charging power will not be displayed. 4. When the screen displays an overload alarm, it means that the charging power is too high. Please shut down and cool down for a while or try using a low-power device, then try charging again (for example, shut down and cool the power station for 30 minutes and restart, if there is still an overload prompt, please provide a screenshot or video and contact support.eu@ecoflow.com 5. The AC switch will turn off after 12 hours if the power of the electrical appliance is less than 10W because the power detection is equivalent to having no power output. At this time, the switch needs to be turned on again.

Contact us