Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Can I connect more than one power station together in series? (For all power stations)

Yes, we recommend connecting 2 same units in series at most. Furthermore, please also note: 1. The slave unit must be fully charged before being connected. 2. Must not charge the main unit when the slave is connected.

Can I connect EcoFlow power stations to my house electric panel directly? (For all power stations)

Yes, but please note: - The transfer switch should be connected to the power station's AC output port; - You should disconnect the circuits from the grid before they are supported by the power station; - The total power consumption of the circuits should not exceed the output power rating; - The output will not be grounded if the power station is not connected to the grid.

How to store and maintain Ecoflow power station

1. To prolong the battery life, we recommend that you use and store the product in an environment of 20°C to 30°C, away from water, heat, and metal objects. 2. For long-term storage, discharge the product down to 30% and then charge it up to 60%. Continue to follow this procedure every 3 months. Units that are not charged and discharged for more than 6 months will no longer be covered under warranty. 3. For safety reasons, please do not store this product in an environment above 45°C or below -10°C over a long period.

Why is the power station charging slowly? How can I solve this?

1. If the temperature is too high, turn off the unit or stop the load, this will let it cool down. 2. If the temperature is too low for charging, place the unit somewhere warmer or let electrical appliances discharge it for a while. 3. The charging power of the unit is related to the battery level. When the unit starts charging from 0% or is about to be fully charged, it is normal that the charging power is low.

When does the fan work and when does it stop? (at what temperature)

Different power stations have various conditions that prompt the fan to start running of fan operation, for RIVER series, you can set that manually in the app, or set it to always be on. For DELTA (1300), the fan will turn on when the internal temperature is greater than 45°C.

Contact us