Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Why is my RIVER automatically shutting down?

1. The battery needs to be charged. 2. If the AC and DC power buttons are turned off, without any input or output for 120 minutes, the product will automatically shut down. 3. Check if you set a standby time on the app, which can be adjusted under System Standby.

My RIVER won't turn on, what should I do?

1. Check if it is caused by insufficient battery. If it is, charge and turn it on again. If the charging fails, please follow the instructions on charging failures as seen in the previous question. 2. If there is no response after you short press or long press (3 seconds) the Main Power Button, please contact support.eu@ecoflow.com

Why wont my RIVER charge my appliances/devices?

1. If it is charging from an AC outlet, confirm that the AC switch is turned on. The same goes for DC outlets. 2. If the AC or DC switch is turned on, and it still cannot be charged, please confirm whether the output power of the power station meets the wattage requirements of your device 3. When the power from a DC source and car charger is less than 1 watt, the charging power will not be displayed. 4. When the screen displays an overload alarm, it means that the charging power is too high. Please shut down and cool down for a while or try using a low-power device, then try charging again (for example, shut down and cool the power station for 30 minutes and restart, if there is still an overload prompt, please provide a screenshot or video and contact support.eu@ecoflow.com 5. The AC switch will turn off after 12 hours if the power of the electrical appliance is less than 10W because the power detection is equivalent to having no power output. At this time, the switch needs to be turned on again.

Why won't my RIVER charge all the way to 100%?

1. Make sure that the battery setting function in the app is set to 100%. You can set this in the app. 2. Perform SoC calibration three times by fully discharging and charging the battery.

Why is my RIVER's input power hopping when i try to charge it? How do i fix this?

To fix this, try charging and discharging the unit 3 times. If it still occurs, please provide a video demonstrating the issue and contact support.eu@ecoflow.com

Contact us