Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
1. Please confirm whether the car cigarette lighter has normal voltage and power output. 2. Try using a solar panel to charge the power station. If the solar panel can be used to charge, it means that there is a problem with the car charger to XT60 cable. Change the cable, and if the solar panel still cannot be used to charge, then contact support.eu@ecoflow.com
1. The charging temperature may be too high. If you used high-power electrical appliances for extended periods, don’t use the power station for a while to allow the temperature to drop. 2. The charging temperature may be too low. If the outside temperature is too low or the temperature of the battery cell is lower than 0°C, place the power station somewhere warmer. 3. The charging voltage or current may be too low. Charge the device according to the rated charging voltage and current. 4. Change the charging method or the cable. If the solar panel has no input and the car charger has input, it means that the solar panel or solar charging cable is broken. Try to replace the solar charging cable or solar panel. 5. If none of the above methods work, provide a video explaining the fault and contact support.eu@ecoflow.com
1. If the temperature is too high, turn off the unit or stop the load, this will let it cool down. 2. If the temperature is too low for charging, place the unit somewhere warmer or let electrical appliances discharge it for a while. 3. The charging power of the unit is related to the battery level. When the unit starts charging from 0% or is about to be fully charged, it is normal that the charging power is low.
This product has X-Boost enabled by default. You can use the EcoFlow app to turn this function on or off. X-Boost is not available in the following situations: (1) the AC output is turned on in the charging state (in bypass mode) and (2) the X-Boost mode is turned off. X-Boost is more suitable for heating and electrical equipment, but not for all electrical appliances. Some electrical appliances equipped with voltage protection (such as precision instruments, etc.) are not suitable for X-Boost. To confirm whether the device is compatible with X-Boost, please refer to the actual test.
RIVER series supports Solar to XT60 connection for most solar panels. We recommend that you use the solar panels with 200W max charging power, 10-25V input, and DC 10A max current.