Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Why does the car charging port not output any power?

1. Confirm whether the DC switch is turned on, and the DC switch will light up to indicate it is on. 2. Try to replace the head of the charger to see whether the cable is faulty 3. If none of the above methods work, provide a video explaining the fault and contact support.eu@ecoflow.com

Can I connect solar panels in series / parallel?

1. Up to 2 sets of 110W EcoFlow solar panels can be connected in parallel. Series connection is not supported. For parallel connection, you need to buy the Solar Parallel Connection Cable separately. 2. Third-party solar panels of the same wattage lower than 110W, 10-25V input, and DC 10A max current can be connected in parallel. According to the specifications, they may be able to support both parallel connection and series connection. However, we don’t recommend that you connect solar panels of different wattages at the same time.

Why is my power station input power hopping when i try to charge it? How do i fix this?

To fix this, try charging and discharging the unit 3 times. If it still occurs, please provide a video demonstrating the issue and contact support.eu@ecoflow.com

How to Calibrate SoC

Discharge the unit to 0%, then charge to 100% until there is no input.

Do you have wind charging solutions?

We do not have an official solution for wind turbine charging yet. However, a DIY solution is possible at your own risk. (As long as wind power meets our input XT60 port and AC inlet requirements of the power stations)

Contact us