Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
Different power stations have various conditions that prompt the fan to start running of fan operation, for RIVER series, you can set that manually in the app, or set it to always be on. For DELTA (1300), the fan will turn on when the internal temperature is greater than 45°C.
So far, DELTA Pro/Smart Home Panel/Solar Tracker have a bluetooth module and can connect to the app via bluetooth. Other models without bluetooth can connect to the app via IOT or Direct Connection.
You can connect the power station to the app in three ways—Direct Connection mode, IOT mode, and Bluetooth (only for DELTA Pro). Please check the link below for our app user manual. Connection modes instructions are provided in detail on pages 4-9. APP user manual : (https://cdn.shopify.com/s/files/1/1996/9707/files/APP_user_manual_updated1103.pdf?v=1635933130) In addition, we have a video tutorial on this topic here: https://youtu.be/9oUPsj8FlTk
1. If the temperature is too high, turn off the unit or stop the load, this will let it cool down. 2. If the temperature is too low for charging, place the unit somewhere warmer or let electrical appliances discharge it for a while. 3. The charging power of the unit is related to the battery level. When the unit starts charging from 0% or is about to be fully charged, it is normal that the charging power is low.
No, this is because the car charging and solar charging cables share the same input (XT60 outlet).