Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Can I connect more than one power station together in series? (For all power stations)

Yes, we recommend connecting 2 same units in series at most. Furthermore, please also note: 1. The slave unit must be fully charged before being connected. 2. Must not charge the main unit when the slave is connected.

Can I connect EcoFlow power stations to my house electric panel directly? (For all power stations)

Yes, but please note: - The transfer switch should be connected to the power station's AC output port; - You should disconnect the circuits from the grid before they are supported by the power station; - The total power consumption of the circuits should not exceed the output power rating; - The output will not be grounded if the power station is not connected to the grid.

How to store and maintain Ecoflow power station

1. To prolong the battery life, we recommend that you use and store the product in an environment of 20°C to 30°C, away from water, heat, and metal objects. 2. For long-term storage, discharge the product down to 30% and then charge it up to 60%. Continue to follow this procedure every 3 months. Units that are not charged and discharged for more than 6 months will no longer be covered under warranty. 3. For safety reasons, please do not store this product in an environment above 45°C or below -10°C over a long period.

Why is the power station charging slowly? How can I solve this?

1. If the temperature is too high, turn off the unit or stop the load, this will let it cool down. 2. If the temperature is too low for charging, place the unit somewhere warmer or let electrical appliances discharge it for a while. 3. The charging power of the unit is related to the battery level. When the unit starts charging from 0% or is about to be fully charged, it is normal that the charging power is low.

Why does the car charging port not output any power?

1. Confirm whether the DC switch is turned on, and the DC switch will light up to indicate it is on. 2. Try to replace the head of the charger to see whether the cable is faulty 3. If none of the above methods work, provide a video explaining the fault and contact support.eu@ecoflow.com

Contact us