Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
In terms of parameters, compared with the previous generation products, DELTA 3000 Gen4 and DELTA 3800 Gen4 are mainly improved in weight and PV charging power, with specific performances as follows: 1. Reduced weight but unchanged capacity DELTA 3000 Gen4 weighs about 26 kg (low-voltage version: 26 kg; high-voltage version: 25.6 kg), about 20% lighter than DELTA 3 Ultra DELTA 3800 Gen4 has a capacity increased to 3763 Wh and weighs only about 30.6 kg (low-voltage version: 30.6 kg; high-voltage version: 30.1 kg), about 15 kg lighter than Delta Pro (about 45 kg) 2. Increased PV input power Delta 3 Ultra: 800W per channel Delta 3 Ultra Plus: 800W per channel for two channels, totaling 1600W DELTA 3000 Gen4: 1000W per channel DELTA 3800 Gen4: 1000W per channel for two channels, totaling 2000W 3. Optimized mobility If you have frequent mobility needs, you can separately purchase the EcoFlow DELTA Series Folding Transport Cart for convenient carrying.
All supported; X-Stream: 1. US/CA: 1,800W, 15A 2. EU/UK/AU/ZA: 2,400W, 10A. Refer to the user manual for X-Boost power in each region. Note: X-Boost is not available when the device is connected to AC input (e.g. when the power supply is charging or in bypass mode). Bypass mode: The device automatically enables bypass mode when charging and discharging simultaneously (via AC input and output ports).
In bypass mode (charging and discharging simultaneously), when the load power is greater than the mains input power, the battery inverter output and the mains supply power to the load together.
DELTA 3800 Gen4 can connect up to 2 extra batteries via the EcoFlow Smart Extra Battery Expansion Adapter. Suggested placement: Delta 3 Max Plus Extra Battery: Can be stacked directly on top of the main unit Delta Pro 3 Extra Battery: It is recommended to stack the two extra batteries and place them next to the main unit Safety reminder: When stacking, please ensure the bottom bearing surface is flat and stable, reserve sufficient heat dissipation space, and avoid blocking the equipment's ventilation vents.
It is recommended to use at altitudes below 3000 meters.