Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
1. Press the IoT button again to reconnect. 2. Use another mobile phone to set up a hotspot connection. If the DELTA Max can connect to the phone's hotspot connection, it means that the connection function of the DELTA Max is normal. Since the WIFI connection only supports 2.4GHz, check the home router. If it is 2.4 GHz, modify the router configuration. 3. If none of the above methods work, provide a photo of the serial number at the bottom of the device and contact support.eu@ecoflow.com
When the car is out of power, you can use a dedicated jumper cable to charge the battery in around 15-20 minutes. Jumper cables are sold separately from a third party. (Note: When charging, do not start the car otherwise, it will cause the battery to malfunction)
The use of communication equipment or equipment with electromagnetic interference, such as walkie-talkies and electromagnetic wave generators, will disrupt the power supply. You can use an extension cord to extend it slightly and use it at a longer distance.
X-Boost has been enabled by default, but you can use the EcoFlow app to turn this function on or off. X-Boost cannot be used in the following situations: (1) AC output is turned on in the charging state (in bypass mode) (2) The X-Boost mode is turned off. X-Boost is suitable for heating and electrical equipment but not for electrical appliances with voltage protection, such as precision instruments. Refer to the actual test to check whether a device is compatible with X-Boost.
1. The standard 400W solar panel supports up to 2 in series. 2. For non-standard solar panels with a wattage lower than 400W, the voltage and current can be used in series at 11-100V DC 10A. They can be connected in parallel or in series, but using solar panels with different wattages is not recommended.