Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
You can connect the power station to the app in three ways—Direct Connection mode, IOT mode, and Bluetooth (only for DELTA Pro). Please check the link below for our app user manual. Connection modes instructions are provided in detail on pages 4-9. APP user manual : (https://cdn.shopify.com/s/files/1/1996/9707/files/APP_user_manual_updated1103.pdf?v=1635933130) In addition, we have a video tutorial on this topic here: https://youtu.be/9oUPsj8FlTk
We do not have an official solution for wind turbine charging yet. However, a DIY solution is possible at your own risk. (As long as wind power meets our input XT60 port and AC inlet requirements of the power stations)
No, this is because the car charging and solar charging cables share the same input (XT60 outlet).
1. Please check if there are external high-power electrical appliances. If the power of the connected electrical appliance is about the same as the battery capacity, the battery will run out in about 1 hour. 2. Perform a complete charge and discharge for an SoC calibration.
So far, DELTA Pro/Smart Home Panel/Solar Tracker have a bluetooth module and can connect to the app via bluetooth. Other models without bluetooth can connect to the app via IOT or Direct Connection.