Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Can I install the STREAM Ultra by myself?

The STREAM Ultra can be installed and maintained by users themselves (only available in Utah, USA now). *Please refer to the Power Connection Requirements section under the Installation Preparation chapter in the Installation Guide to choose the installation method that suits your household situation. *Each time you change the installation location, please refer to the above information again.

Can the STREAM Microinverter connect to the STREAM Ultra, and what about other (third-party) Microinverters?

Yes, and it supports connecting STREAM Ultra to third-party microinverterson the market through the AC outlets (NEMA 5-15).

Can the product connect to 5GHz Wi-Fi?

Currently, it only supports 2.4GHz Wi-Fi.

If there are multiple devices in the STREAM system, will it prioritize using up one device's power before starting to use another's?

Not necessarily. It might prioritize using one device's power or discharge multiple devices simultaneously. The system employs an intelligent charging and discharging strategy based on the current power levels of the devices, the power consumption of the appliances, the actual connection setup, and your settings in the app. Thus, the discharging performance of specific devices may vary.

Each MPPT of the STREAM Ultra has a maximum power of 500W. Can I connect solar panels with more than 500W to each port?

Yes, as long as the solar panel meets the conditions of operating voltage (15-60V) and operating current (≤14A). This can optimize solar utilization during low sunlight conditions.

Contact us