Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
"1. The battery can only be charged up to the charge limit in all scenarios. 2. In savings mode, if the grid is available, the battery will discharge until it reaches the backup reserve level. During a grid outage, it discharges until it hits the discharge limit. 3. If you're not in savings mode, the battery will simply discharge until it hits the discharge limit."
If your house panel is already connected to a rooftop solar system (AC Coupling) through an inverter that links to a dedicated breaker, it is compatible with our Smart Home Panel 2. Please be aware that in the event the grid fails, the AC coupling system will also cease to function because it relies on detecting the electrical signal from the grid. When the grid is operational, the solar system can supply power to the Delta Pro Ultra, treating it as a load.
No. EcoFlow DELTA Pro Ultra won't affect NEM 2.0. It cannot be connected to NEM 2.0 rooftop photovoltaic systems, so a new system would need to be installed.
Battery Connection Box: NEMA Type 1 electrical enclosure; safe for indoor installation (equivalent to IP10). Distribution Panel: NEMA 3R standards can be installed indoors and outside (equivalent to IP14).
EcoFlow Smart Home Panel 2's installation time may vary depending on the scope of work required and the current configuration of the circuits in your home. For most homes, EcoFlow Smart Home Panel 2 installs in 3-8 hours, which is similar to replacing a standard distribution box.