Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

What are the temperature and humidity requirements for Smart Home Panel 10?

Operating temperature: 14°F to 113°F (-10°C to 45°C). Storage temperature: -22°F to 158°F (-30°C to 70°C). Operating humidity: up to 85% relative humidity, condensing.

How many portable power stations can I connect to Smart Home Panel 10?

Smart Home Panel 10 connects to one TITAN series portable power station. The power station can be expanded with up to five extra batteries.

Can I connect rooftop solar to a Smart Home Panel 10 branch circuit?

No. Rooftop solar cannot be connected to a Smart Home Panel 10 branch circuit. However, the 240V split-phase model can detect and use excess rooftop solar power through the included CT clamps. The clamps must be placed around the L1 and L2 utility service conductors, with their signal wires connected to the matching CT-L1 and CT-L2 terminals on Smart Home Panel 10.

What are the branch circuit configurations for the 120V and 240V models?

The branch circuit configuration varies by model: 120V single-phase model: 10 circuits—one 30A circuit, one 20A circuit, and eight 15A circuits. 240V split-phase model: one 30A double-pole circuit, one 20A double-pole circuit, two 20A circuits, and four 15A circuits.

Can Smart Home Panel 10 be installed outdoors?

No. Smart Home Panel 10 is rated IP20 and is not waterproof. It must be installed indoors.

Contact us