Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Does WAVE 2 need to be networked during daily use?

Networking is not necessary. When using the app, you can control the device from a close range through Bluetooth or networking, or remotely control it by configuring the network for WAVE 2.

Do I need to clean the WAVE 2 filters manually?

Yes. The air inlet may get blocked with large dust particles and impurities in the air during outdoor use, affecting the effect of cooling/heating. Regularly remove the front and rear air inlet filters, clean them with a damp cloth using a mild detergent, dry them in the air, and then reassemble them.

What is WAVE 2’s cooling and heating principle?

WAVE 2 regulates the ambient temperature by means of refrigerant heat exchange, and switches between cooling and heating functions by controlling the direction that heat flows in through a four-way valve.

What if the inside of WAVE 2 is full of water?

WAVE 2 supports auto-shutdown with full water. When the water level indication shows full, the device switches to Fan mode if it is in Cooling mode, and automatically shuts down if it is in Heating mode. The prompts will show up in the app or on the LCD display. Please connect the device to the drain pipe. Use the app or press and hold the fan speed button to enable the external drainage function, or drain the residual water in the water tank via manual drainage.

Does WAVE 2 have a dehumidification function?

The device does not have a separate dehumidification mode. But the dehumidification function can be realized to a certain extent when the drain-free function is turned off and the external drainage is started.

Contact us