Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

If I need to buy cables to connect the device and the solar panel, what kind of cables do I need to buy?

STREAM Solar Panel Connection Guide The photovoltaic input interface of the STREAM device is an MC4 interface. You can purchase an appropriate extension cable according to the actual installation distance (usually 3m to 5m, and the length of a single cable should not exceed 30m). If you need to parallel multiple solar panels to increase current, you can also optionally add an MC4 branch cable. [Note]: The current-carrying capacity of the selected cable must not be lower than the short-circuit current (40A) of the corresponding photovoltaic circuit to ensure safe operation. Connection Steps: 1. Insert the MC4 male connector (+) and MC4 female connector (−) of the solar panel into the extension cable respectively. 2. Connect the other end of the extension cable to the PV INPUT interface marked on the back of the STREAM 5000 (pay attention to the correspondence of positive and negative poles). 3. Tighten the MC4 connector until a "click" sound is heard to confirm that the connection is secure.

What specifications of solar panels are required to purchase the STREAM 5000/Is the STREAM 5000 compatible with third-party solar panels?

STREAM5000 is compatible with third-party solar panels. You only need to confirm the parameters and combination method of the connected solar panels to determine whether the maximum power of the solar panels is within the specifications of STREAM 5000. If it exceeds the range, it will cause damage to STREAM 5000 and cannot be used; In the solar input specifications of STREAM: the voltage range of a single port is (20V, 60V), the short-circuit current is 40A, and the maximum input power is 1250W; The solar panel combination method must meet the following conditions: 1. Voltage: The open-circuit voltage of the solar panel must be within the voltage range of STREAM5000; 2. Current: The short-circuit current of the solar panel is less than the short-circuit current of STREAM5000; 3. Power: The maximum power of the solar panel cannot exceed 1.2 times the maximum input power of 1250W; 4. The current-carrying capacity of the cable connecting the photovoltaic must not be lower than the short-circuit current of the photovoltaic panel of that circuit; All four conditions must be met simultaneously; if any one is exceeded, it cannot be used; Combination method: STREAM 5000 prohibits series connection of photovoltaic panels and only supports parallel connection of photovoltaic panels; Parallel connection: The current is normally superimposed, and the voltage is limited by the smallest panel. The photovoltaic panels connected in parallel to one PV interface of STREAM 5000 must be of the same model and specifications.

What is the maximum charging power of the battery? If I need to fully charge the battery, how long will it take at the fastest?

The maximum charging power of the battery is 2500W. By setting a custom charging task to charge at the maximum power, it can be fully charged in approximately 2.5 hours under ideal conditions.

What is the volume/weight of the STREAM 5000?

The dimensions of STREAM 5000 are 295mm*489mm*298mm, and the weight is 45.4 (±0.5) kg (bare unit).

Can I use the STREAM 5000 in low or high temperature environments?

The operating temperature of the device is: -20°C~55°C If the ambient temperature of the device is >35°C, the output power of the device will decrease; if the ambient temperature of the device is <0°C, the charging power of the device will decrease.

Contact us