Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
When connected to the power grid, STREAM 5000 automatically limits its output power to the maximum permitted under local regulations. In Germany, systems operating within the applicable simplified connection limits must be registered in the Marktstammdatenregister, and the local distribution network operator must be notified.
STREAM 5000/STREAM AC 5000 has an IP65 protection rating and can be used indoors/outdoors. It is recommended to install it in a well-ventilated, cool and shaded place.
When there is a power outage, the STREAM 5000 will immediately switch to off-grid mode, the grid-connected port will stop outputting, and the device will supply power to the loads connected to the AC Outlet. Prerequisites: 1. There must be sufficient remaining power in the battery; 2. The load needs to be connected to the AC Outlet of the STREAM 5000. Notes: - The grid-connected port will disconnect immediately upon detecting a grid power outage and cannot be used for off-grid power supply; - Do not connect the AC Outlet of the STREAM 5000 to the power grid; - The actual available duration depends on the load power, remaining battery power, and photovoltaic power. If the area where you live frequently experiences power outages, it is recommended to keep the battery fully charged to enable seamless switching to backup power in the event of a power outage.
Cost-saving: In areas where billing is based on peak power or capacity, reducing monthly/annual peaks may lower capacity fees and costs related to contracted power. More peace of mind: During peak concurrent electricity use (e.g., simultaneous operation of EV charging, heat pumps, and ovens), it reduces the power draw pressure on the main circuit and lowers the risk of tripping due to excessively high peaks. More flexibility: It allows expansion of home electrification without upgrading the grid contract or modifying home electrical distribution. More convenience: It operates automatically after setting the power limit and time period, eliminating the need for frequent manual intervention.
During peak electricity usage hours, when the household draws power from the grid exceeding the set power limit, the system will automatically use battery discharge to compensate based on the set peak-shaving SOC, thereby reducing the peak power drawn from the grid. It can work collaboratively in operating modes such as self-consumption and AI mode without the need for separate mode switching.