Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
When storing the solar panel, please fold the solar panels and then put them in the bag with the lead-out wire of the junction box facing upward.
1. Ensure that the solar panel is installed outdoors. Panels installed indoor without sunlight exposure will not be able to charge portable power stations. 2. Check whether the connection cable has been properly connected according to the instructions, and re-plug it to confirm. 3. Check whether the solar panel input voltage and current match the specifications of the solar input parameters of the portable power stations, and check whether the positive and negative terminal connections are reversed. 4. Check whether any alarm message is shown on the display of the portable power stations, and troubleshoot it as instructed. 5. If the solar panel still does not work properly after the above steps, use the XT60i port to connect the portable power station to the car charger port to confirm whether the charging cable is working properly. 6. Contact after-sales service for help and send a video of the steps you have carried out.
This depends on weather conditions. Generally speaking, on a clear day with no clouds in the sky, sunlight hitting the 60W Solar Panel at a 90° angle usually generates 48W–54W of power as the normal power range (this is tested under the light of 800–900W/m² with a panel temperature of 50°C; and the nominal power rating is tested based on the light of 1,000W/m² in AM1.5 weather conditions with a panel temperature of 25°C. Power output data that is close to nominal values are normally observed at midday in winter). When the solar panel input current is relatively low, it is not recommended to use the solar panel for charging. This is because when the standby power is higher than the input power, the energy storage battery has voltage fluctuations that can damage the battery.
The 60W Portable Solar Panel is made of monocrystalline silicon and has a waterproof rating of IP68. Monocrystalline silicon is more efficient in power generation than polycrystalline silicon. Other materials used by the panel, such as ETFE and EVA, can resist aging, corrosion, and UV damage, ensuring that the 60W Portable Solar Panel can be used outdoors for an extended period of time.
Yes, but the following two conditions must be met: 1. There is an MC4 connecter that can be connected to the EcoFlow 60W Portable Solar Panel. 2. Other solar panels have approximately the same current and voltage as the EcoFlow 60W Portable Solar Panel.