Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
The system can be installed and maintained by users themselves. However, if you are in the UK, due to local regulations, the BKW DIY cable used with the Stream Microinverter must be connected to the distribution board. This operation requires a professional installer or electrician.
EcoFlow provides AC cables with an equipment grounding conductor/grounding plug. If the cable is plugged into a socket that is properly installed and grounded according to all local codes and regulations, the device will be correctly grounded. If you are unsure about the socket’s grounding status or if local regulations mandate specific grounding standards, contact a qualified electrician to establish proper grounding via the product’s grounding terminal. For detailed procedures, contact EcoFlow technical support.
If your system consists solely of the STREAM Microinverter, excess solar power will be fed into the grid.
When connecting multiple solar panels in series or parallel, ensure that the maximum operating voltage (V) and maximum operating current (I) of each panel group do not exceed the limits of a single PV port on the STREAM Microinverter: Maximum Operating Voltage: 60V Maximum Operating Current: 16A If you require extension or parallel cables for solar panels, they can be purchased separately from EcoFlow. Additionally, each group of solar panels connected in series or parallel must have consistent Maximum Operating Voltage (V) and Maximum Operating Current (I). Typical compatible solar panel specifications per PV port group: 200W-600W.
Yes, third-party solar panels are compatible if they meet the PV input specifications and use MC4 connectors. The input range per PV port is: Operating Voltage: 16-60V Operating Current: ≤16A