Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
It is not needed to bury any cables. A virtual boundary will be generated after a map is created through remote control of the robotic lawn mower, and the robotic lawn mower will automatically plan the routes within the boundary for mowing.
The robotic lawn mower is charged through contact between the charging pads on the robotic lawn mower and those on the charging station. If there are grass clippings and water drops between the pads during charging, the pads will be blackened.
The charging may fail if the charging pads are blackened. Please polish the blackened area with dry sanding paper. Also check whether the charging pads of the mower are blackened, and polish them if so.
1. The charging pads of the robotic lawn mower are not in full contact with those of the charging station. Solution: Manually detach the robotic lawn mower from the charging station, and then put it back. 2. Check whether the charging pads are dirty, and the dirt will lead to charging failure. Solution: Clean the dirt with soft cloth. If it cannot be cleaned with the soft cloth, try to polish it with fine sandpaper. 3. If the problem still exists, please contact the after-sales service.
The cutting height refers to the height from the blade disc to the tire. The actual height of cut grass will be larger than the set value as the grass is soft.