Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

The robotic lawn mower cannot return to the charging station automatically. Why?

It may not return to the charging station in the following cases: 1. The satellite signal is weak due to walls, trees or other obstacles within the range of 2m (6.56ft) around the antenna. Solution: Move the antenna to an open area, and re-create the map. 2. The path on which the robotic lawn mower returns to the charging station is blocked by obstacles. Solution: Remove the obstacles. 3. The charging station or the antenna is moved after the map is created. Solution: Fix the charging station and the antenna, and then re-create the map. 4. The front camera lens of the robotic lawn mower is broken or blocked by obstacles, and the robotic lawn mower cannot recognize the charging station as the result. Solution: Remove the obstacles/Contact the after-sales service for maintenance in case of broken camera lens.

What should I do if the robotic lawn mower cannot be started?

The robotic lawn mower cannot be started in the following conditions: 1. The battery is dead. Solution: Charge the robotic lawn mower on the charging station until the battery is fully charged. 2. The battery is over-discharged, that is, the battery level cannot be restored after charging, and the robotic lawn mower loses power quickly after leaving the charging station. Solution: Contact the after-sales service for solutions. 3. The robotic lawn mower has the fault that it cannot be started after the battery is fully charged. Solution: Contact the after-sales service for solutions. 4. The charging fails due to dirty charging pads. Solution: Clean the dirt with soft cloth. If it cannot be cleaned with the soft cloth, try to polish it with fine sandpaper.

After the robotic lawn mower returns to the charging station due to low battery, what is the required battery level for it to continue the task?

When the remaining battery level of the robotic lawn mower is 20%, the robot will pause the mowing task and automatically return to the charging station. When the robotic lawn mower is charged to 90%, it will return to the point where it stopped mowing to continue the operation, with no need to set the task again.

Is the GNSS antenna lightning protected?

The antenna with the metal mast is installed on the ground. In case of lightning stroke, the electric charge will flow into the mast through the metal rod, and then to the ground, without impact on the GNSS antenna and the surroundings.

How can I judge whether the satellite signal is suitable for operation?

The user can check the satellite signal strength based on the tail light status of the mower. When the tail light is blue breathing, the GNSS antenna signal is optimal. The user can also check the color of GNSS antenna signal strength icon in the app to judge the signal strength.

Contact us