Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
The robotic lawn mower can identify the grass through AI and perform the mowing task. If the grass is too high and too dense, the sensor of the robotic lawn mower may identify it as an obstacle, leading to obstacle avoidance action. If you have to mow this zone, please cut the grass to 80mm (3.15in) by using a hand mower before it performs the automatic mowing task.
The spare blades are replaceable, so the user does not need to sharpen them. You are recommended to replace the three spare blades every quarter. Take care to protect your hands when replacing them so as to avoid accidental injury.
1. Please check the spare blades and the height of grass. If the spare blades are blunt, replace them with new ones. If the grass is too high, please cut the grass to expected height with a hand mower first. 2. If the actual height of grass is significantly larger than the set cutting height, the robotic lawn mower needs multiple (>5) cycles to achieve the set mowing height.
Every time the charging station and the GNSS antenna is moved, it is necessary to re-create a map. If the positions of the antenna and charging station remain unchanged when they are reused in the next year, it is not needed to re-create a map.
The minimum recommended distance from the lake is 1m (3.28ft).