Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

What are some of the considerations when using the device?

Before updating the firmware, make sure that the device is connected to an AC power source for stable power input. The WAVE 2 works with EcoFlow outdoor power stations, but an XT150 cable needs to be prepared or purchased in advance. Refer to the FAQ for compatible models and connection methods. When powered by a car or solar energy, the power will be lower and the voltage will be unstable, so the device can only work in fan mode. Please use a plug-in battery if you need to use the cooling/heating function. When powered by solar energy in dim environments, please turn on the plug-in battery and connect it to the device to ensure normal operation. A plug-in battery can supply power to the WAVE 2 and DELTA 2 simultaneously. The working temperature range of the WAVE 2 is 5°C–50°C. Please do not use the device outside of this range. When an exhaust hose is used, please do not stretch or bend it excessively to avoid wind resistance, which may affect the efficiency of the WAVE 2.

Abnormal cooling

1. Check that the mode and temperature are correctly configured. 2. Use the device within the operating temperature range. Higher ambient temperatures will lead to greater working loads and compromised cooling effect. 3. Remove any blocking objects and make sure that the air inlet is more than 0.5 m from walls. 4. Connect the device to the Ecoflow app and complete network setup. Then check for any firmware updates. 5. Refer to the user manual and use the device within the specified temperature range. 6. Check the device's cooling effect after the protective shutdown period ends.

What are some of the considerations when using the device?

Before updating the firmware, make sure that the device is connected to an AC power source for stable power input. The WAVE 2 works with EcoFlow outdoor power stations, but an XT150 cable needs to be prepared or purchased in advance. Refer to the FAQ for compatible models and connection methods. When powered by a car or solar energy, the power will be lower and the voltage will be unstable, so the device can only work in fan mode. Please use a plug-in battery if you need to use the cooling/heating function. When powered by solar energy in dim environments, please turn on the plug-in battery and connect it to the device to ensure normal operation. A plug-in battery can supply power to the WAVE 2 and DELTA 2 simultaneously. The working temperature range of the WAVE 2 is 5°C–50°C. Please do not use the device outside of this range. When an exhaust hose is used, please do not stretch or bend it excessively to avoid wind resistance, which may affect the efficiency of the WAVE 2.

What should I know about cleaning and maintenance?

It's recommended that you monitor the condition of the cutting BLADEs and change them when needed. To clean BLADE, use a high-pressure water hose to wash the front and rear wheels, as well as the BLADEs. Do not point the high-pressure hose directly at the BLADEs. Wipe the camera and battery compartment with a soft cloth. When storing BLADE, ensure the battery is fully charged and place it in a well-ventilated place. Charge the battery every six months when not in use.

What should I take note of when mowing?

If the grass is too long, use a walk-behind mower to mow the grass to 80 mm or shorter. Remove any trash or animal waste in the grass before mowing. Pay attention to children and animals while mowing to avoid any injuries.

Contact us