Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
Turn off the ice container sensor to avoid freezing failures due to the sensor.
1. GLACIER must not be positioned at an angle exceeding 30° 2. Let GLACIER stand for at least two hours before use to allow the internal pressure to stabilize. 3. When positioning GLACIER, ensure there is at least 50 mm of free space in front of air inlets and outlets. 4. You must connect the optional plug-in battery (optional) if you wish to use solar energy to power GLACIER. 5. When upgrading the firmware, if you have opted to use a plug-in battery, plug it into GLACIER while upgrading. Please ensure that the plug-in battery has more than 5% of charge remaining. 6. When using the outdoor charging port of the vehicle to power GLACIER, ensure that you have turned off the battery protection feature to prevent accidental activation of the vehicle battery protection feature.
Ensure that you reset the drain pipe after you drain the water.
1.Ensure that you drain and dry the ice container if you don't plan on using it for a while. 2.The dual temperature zone can be cleaned by wiping a soft cloth. 3.Ensure GLACIER is at a normal temperature before cleaning it. 4.Completely drain and return the drain pipe to its original position before transporting GLACIER.
A deviation in temperature of ±3℃ is a typical occurrence in GLACIER. Please contact after-sales customer service in the event of abnormal temperature deviation.