Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

What should I pay attention to when the ice maker is not in use for a long period of time?

When the ice maker is not in use for a long period of time, drain the water in time and wipe it clean to prevent odors from accumulating if the water remains for a long time.

Freezing time display error

The displayed freezing time is an estimation. As the freezing process is affected by environmental factors such as ambient temperature, the freezing time may be updated during the freezing process.

Vehicle protection

When GLACIER is being powered by a charging port in a vehicle, GLACIER will detect the remaining power to ensure the vehicle has sufficient power to start up. If the vehicle's battery is low, GLACIER will stop using the vehicle's battery for power. It's recommended that you use a high setting to conserve the vehicle's battery charge.

What should I take note of while using GLACIER?

1. GLACIER must not be positioned at an angle exceeding 30° 2. Let GLACIER stand for at least two hours before use to allow the internal pressure to stabilize. 3. When positioning GLACIER, ensure there is at least 50 mm of free space in front of air inlets and outlets. 4. You must connect the optional plug-in battery (optional) if you wish to use solar energy to power GLACIER. 5. When upgrading the firmware, if you have opted to use a plug-in battery, plug it into GLACIER while upgrading. Please ensure that the plug-in battery has more than 5% of charge remaining. 6. When using the outdoor charging port of the vehicle to power GLACIER, ensure that you have turned off the battery protection feature to prevent accidental activation of the vehicle battery protection feature.

Freezing detection settings

Turn off the ice container sensor to avoid freezing failures due to the sensor.

Contact us