Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Once Power Hub is in low-light mode, can you manually exit low-light protection mode and reactivate PV input?

If there is no PV input after illumination conditions change (example: nightfall), then low-light protection is enabled. Manually exiting low-light protection Method 1: Turn PV input off and on again. Method 2: Remove the PV input cable and wait at least 10 seconds before reconnecting it.

How do you connect Power Hub to a third-party generator?

A third-party generator can be connected to the 5kVA AC input of Power Hub, just like power grid input.

What is the purpose of the USB port on the right side of Power Hub?

USB can be used to power the user's own 4G dongle or GPS device.

Resetting Power Kits Bluetooth and Wi-Fi connections

Press and hold the DC button (3 seconds or more). The device's indicator strip lights up and flashes three times, indicating Bluetooth has reset.

Parameters supported by Power Link's connected temperature sensors

NTC 1KΩ (B Value: 3470K); NTC 5KΩ (B Value: 3470K); NTC 5KΩ (B Value: 3435K); Custom 1–10KΩ (B Value: 2000–5000K recommended)

Contact us