Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
1. Please confirm whether the car cigarette lighter has normal voltage and power output. 2. Try using a solar panel to charge the power station. If the solar panel can be used to charge, it means that there is a problem with the car charger to XT60 cable. Change the cable, and if the solar panel still cannot be used to charge, then contact support.eu@ecoflow.com
1. Confirm whether the DC switch is turned on, and the DC switch will light up to indicate it is on. 2. Try to replace the head of the charger to see whether the cable is faulty 3. If none of the above methods work, provide a video explaining the fault and contact support.eu@ecoflow.com
1. Up to 2 sets of 110W EcoFlow solar panels can be connected in parallel. Series connection is not supported. For parallel connection, you need to buy the Solar Parallel Connection Cable separately. 2. Third-party solar panels of the same wattage lower than 110W, 10-25V input, and DC 10A max current can be connected in parallel. According to the specifications, they may be able to support both parallel connection and series connection. However, we don’t recommend that you connect solar panels of different wattages at the same time.
1. The battery needs to be charged. 2. If the AC and DC power buttons are turned off, without any input or output for 120 minutes, the product will automatically shut down. 3. Check if you set a standby time on the app, which can be adjusted under System Standby.
"1. Check if it is caused by insufficient battery. If it is, charge and turn it on again. If the charging fails, please follow the instructions on charging failures as seen in the previous question. 2. If there is no response after you short press or long press (3 seconds) the Main Power Button, please contact support.eu@ecoflow.com"