Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

How to Calibrate SoC

Discharge the unit to 0%, then charge to 100% until there is no input.

Notes on X-boost

This product has X-Boost enabled by default. You can use the EcoFlow app to turn this function on or off. X-Boost is not available in the following situations: (1) the AC output is turned on in the charging state (in bypass mode) and (2) the X-Boost mode is turned off. X-Boost is more suitable for heating and electrical equipment, but not for all electrical appliances. Some electrical appliances equipped with voltage protection (such as precision instruments, etc.) are not suitable for X-Boost. To confirm whether the device is compatible with X-Boost, please refer to the actual test.

Why is the power station charging slowly? How can I solve this?

1. If the temperature is too high, turn off the unit or stop the load, this will let it cool down. 2. If the temperature is too low for charging, place the unit somewhere warmer or let electrical appliances discharge it for a while. 3. The charging power of the unit is related to the battery level. When the unit starts charging from 0% or is about to be fully charged, it is normal that the charging power is low.

Why is my solar panel not working?

1. The solar panel must be placed outdoors for use. If placed indoors, it won't work. 2. Check if there is any error prompt on the LCD Screen of your power station. If there is, follow the prompt to solve the problem. 3. Check the connection status by removing and reconnecting it. 4. Only solar panels with 10-25V input and DC 10A max current can be connected in parallel. Check if the voltage and current of the connected solar panels is within the range and whether the positive and negative poles are connected reversely. 5. If you are using a third-party connection cable, the cable length should not exceed 3 m. If it is longer than 3 m, you can change it to one with a diameter of 6.5 mm and a wire diameter of 4 mm². Otherwise, the charging won't work. 6. Check if you can charge the unit with the car charger. If it works, it means that the solar panel has connection issues or other problems. If the car charger doesn't work either, please record a video and send it to support.eu@ecoflow.com for troubleshooting.

Why is my power station input power hopping when i try to charge it? How do i fix this?

To fix this, try charging and discharging the unit 3 times. If it still occurs, please provide a video demonstrating the issue and contact support.eu@ecoflow.com

Contact us