Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
1. Press IOT Button again to try reconnecting with power station. 2. Use another phone hotpot as a router. If you can connect the device to the hotspot network, it means that your router Wi-Fi is not 2.4 GHz. In this case, you can modify the router setting.
1. Please use or store the product in an environment temperature between 20°C to 30°C, away from water, heat, and other metal objects. 2. For long-term storage, please discharge the battery to 30% and recharge it to 60% every three months; products that have not been charged and discharged for more than 6 months will not be covered by the free product warranty. 3. For safety, please do not store the product in an environment temperature higher than 45°C or lower than -10°C for a long time. 4. To prolong the battery life, please use the product in an environment temperature between 20°C to 30°C.
Yes, we recommend connecting 2 same units in series at most. Furthermore, please also note: 1. The slave unit must be fully charged before being connected. 2. Must not charge the main unit when the slave is connected.
When the car is out of power, you can use a dedicated jumper cable to charge the car battery. The charging time is about 15-20 minutes. Customers should use their own jumper cables, not sold by EcoFlow. (Not recommended by EcoFlow) (Note: When charging, do not start the car, otherwise it will cause the battery to malfunction)
Yes, but please note: - The transfer switch should be connected to the power station's AC output port; - You should disconnect the circuits from the grid before they are supported by the power station; - The total power consumption of the circuits should not exceed the output power rating; - The output will not be grounded if the power station is not connected to the grid.