Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
1. If it is charging from an AC outlet, confirm that the AC switch is turned on. The same goes for DC outlets. 2. If the AC or DC switch is turned on, and it still cannot be charged, please confirm whether the output power of the power station meets the wattage requirements of your device 3. When the power from a DC source and car charger is less than 1 watt, the charging power will not be displayed. 4. When the screen displays an overload alarm, it means that the charging power is too high. Please shut down and cool down for a while or try using a low-power device, then try charging again (for example, shut down and cool the power station for 30 minutes and restart, if there is still an overload prompt, please provide a screenshot or video and contact support.eu@ecoflow.com 5. The AC switch will turn off after 12 hours if the power of the electrical appliance is less than 10W because the power detection is equivalent to having no power output. At this time, the switch needs to be turned on again.
1. Make sure that the battery setting function in the app is set to 100%. You can set this in the app. 2. Perform SoC calibration three times by fully discharging and charging the battery..