Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

How do I connect to the app ?

You can connect the power station to the app in three ways—Direct Connection mode, IOT mode, and Bluetooth (only for DELTA Pro). Please check the link below for our app user manual. Connection modes instructions are provided in detail on pages 4-9. APP user manual : (https://cdn.shopify.com/s/files/1/1996/9707/files/APP_user_manual_updated1103.pdf?v=1635933130) In addition, we have a video tutorial on this topic here: https://youtu.be/9oUPsj8FlTk

Battery Runs Down Too Quickly

1. Please check if there are external high-power electrical appliances. If the power of the connected electrical appliance is about the same as the battery capacity, the battery will run out in about 1 hour. 2. Perform a complete charge and discharge for an SoC calibration.

Unable to Fully Charge to 100%

Perform three times SoC calibration by doing three complete charges and discharges.

How to Calibrate SoC

Discharge the unit to 0%, then charge to 100% until there is no input.

Notes on X-boost

This product has X-Boost enabled by default. You can use the EcoFlow app to turn this function on or off. X-Boost is not available in the following situations: (1) the AC output is turned on in the charging state (in bypass mode) and (2) the X-Boost mode is turned off. X-Boost is more suitable for heating and electrical equipment, but not for all electrical appliances. Some electrical appliances equipped with voltage protection (such as precision instruments, etc.) are not suitable for X-Boost. To confirm whether the device is compatible with X-Boost, please refer to the actual test.

Contact us