Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Why won't my RIVER charge all the way to 100%?

1. Make sure that the battery setting function in the app is set to 100%. You can set this in the app. 2. Perform SoC calibration three times by fully discharging and charging the battery.

Why is my RIVER's input power hopping when i try to charge it? How do i fix this?

To fix this, try charging and discharging the unit 3 times. If it still occurs, please provide a video demonstrating the issue and contact support.eu@ecoflow.com

How do I charge the battery of my car with RIVER? (Excluding electric vehicles)

When the car is out of power, you can use a dedicated jumper cable to charge the car battery. The charging time is about 15-20 minutes. Customers should use their own jumper cales, not sold by EcoFlow. (Not recommended by EcoFlow) (Note: When charging, do not start the car, otherwise it will cause the battery to malfunction)

Can I use other products to charge RIVER?

In addition to wall charging, car charging, and solar charging, other equipment such as generators or inverters can be used if they output 220–240V (50Hz/60Hz) of sine wave AC power. When charging RIVER, X-Stream needs the AC input power to be greater than 300W for fast charging or below 140W for slow charging.

What is the standard cable for the car charger port?

The XT60 outlet for the car charger is a standard port. Customers can use the included 1.5m car charging cable or their own car charging cable.

Contact us