Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
This product has X-Boost enabled by default. You can use the EcoFlow app to turn this function on or off. X-Boost is not available in the following situations: (1) the AC output is turned on in the charging state (in bypass mode) and (2) the X-Boost mode is turned off. X-Boost is more suitable for heating and electrical equipment, but not for all electrical appliances. Some electrical appliances equipped with voltage protection (such as precision instruments, etc.) are not suitable for X-Boost. To confirm whether the device is compatible with X-Boost, please refer to the actual test.
RIVER series supports Solar to XT60 connection for most solar panels. We recommend that you use the solar panels with 200W max charging power, 10-25V input, and DC 10A max current.
1. The battery needs to be charged. 2. If the AC and DC power buttons are turned off, without any input or output for 120 minutes, the product will automatically shut down. 3. Check if you set a standby time on the app, which can be adjusted under System Standby.
1. Check if it is caused by insufficient battery. If it is, charge and turn it on again. If the charging fails, please follow the instructions on charging failures as seen in the previous question. 2. If there is no response after you short press or long press (3 seconds) the Main Power Button, please contact support.eu@ecoflow.com
1. If it is charging from an AC outlet, confirm that the AC switch is turned on. The same goes for DC outlets. 2. If the AC or DC switch is turned on, and it still cannot be charged, please confirm whether the output power of the power station meets the wattage requirements of your device 3. When the power from a DC source and car charger is less than 1 watt, the charging power will not be displayed. 4. When the screen displays an overload alarm, it means that the charging power is too high. Please shut down and cool down for a while or try using a low-power device, then try charging again (for example, shut down and cool the power station for 30 minutes and restart, if there is still an overload prompt, please provide a screenshot or video and contact support.eu@ecoflow.com 5. The AC switch will turn off after 12 hours if the power of the electrical appliance is less than 10W because the power detection is equivalent to having no power output. At this time, the switch needs to be turned on again.