Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Why is the power station charging slowly? How can I solve this?

1. If the temperature is too high, turn off the unit or stop the load, this will let it cool down. 2. If the temperature is too low for charging, place the unit somewhere warmer or let electrical appliances discharge it for a while. 3. The charging power of the unit is related to the battery level. When the unit starts charging from 0% or is about to be fully charged, it is normal that the charging power is low.

How to Achieve a 25kWh Capacity

Connecting 2 DELTA Pros with a Double Voltage Hub or Smart Home Panel and adding 1 Extra Battery and 1 Smart Generator to each DELTA Pro provides a capacity of 25 kWh.

What do the error codes on DELTA Pro mean?

301: Cell Under Voltage - Need a timely recharge 302: BMS Lost Connection - Reboot 303: INV Lost Connection - Reboot 102: Cell Under Voltage Alert - No discharge, timely recharge 077: Cell Voltage Differences are too great - Long press the power button for 10 seconds and wait for half an hour.

DELTA Pro Won't Charge Appliances

1. If charging from an AC outlet, check that the AC switch is turned on. The same goes for DC outlets. 2. If the AC or DC switch is turned on, and it still cannot charge, confirm whether the output power of DELTA Pro meets the rated charging power of the electrical appliance. 3. When the power from a DC source and car charger is less than 1 watt, the charging power won't display, but the actual device is charging, try charging another appliance with a larger wattage to see if the charging power displays. 4. When the screen displays an overload alarm, the charging power is too high. Shut down DELTA Pro and leave it to cool down for 30 minutes or try using a low-power device before charging again. If there is still an overload prompt, take a photo or video and contact support.eu@ecoflow.com 5. The AC switch will automatically turn off after 12 hours if the power of the electrical appliance is less than 10W.

Can the Unit Work With a Rough Sine Wave Generator?

No, it needs to be a pure sine wave generator.

Contact us