Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Are DELTA 3 Max (2,048Wh) and DELTA 3 Max Plus (2,048Wh) uninterruptible power supplies (UPS), and what's the switchover time in milliseconds?

DELTA 3 Max (2,048Wh) and DELTA 3 Max Plus (2,048Wh) are UPSs with a switchover time of less than 10 ms, but DELTA 3 Max does not support UPS-HID functionality.

How do I establish communication between DELTA 3 Max Plus (2,048Wh) and other electronic devices?

1. Make sure the device (e.g., NAS device, PC, or laptop) supports UPS functionality. 2. Use a data cable to connect the USB-C-140W output port of the portable power station to the USB port of the device (supports USB 2.0 protocol). 3. After the connection is successful, go to the settings page for the device (e.g., NAS) and configure the relevant settings.

How many extra batteries can I connect to DELTA 3 Max Plus (2,048Wh)?

DELTA 3 Max Plus (2,048Wh) has an extra battery port. You can connect a maximum of two extra batteries via a smart extra battery expansion converter.

Will DELTA 3 Max (2,048Wh) or DELTA 3 Max Plus (2,048Wh) automatically power on when there is grid or solar charging input while the device is off?

Yes, the device will automatically turn on when charging, so you don't need to worry about the device failing to restart when the power comes back on after a blackout. You can also enable the Port Memory feature in Settings. If the device shuts down due to a depleted battery, this feature will restore the output port status once charging starts or when the battery level rises above the set backup reserve level.

How do I calibrate the battery capacity for DELTA 3 Max (2,048Wh) and DELTA 3 Max Plus (2,048Wh)?

Battery capacity can be calibrated after one full charge and discharge cycle.

Contact us