Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Solar Panels Won't Work

1. The solar panel should be placed outdoors. Placing indoors will affect functionality. 2. Check for errors on the LCD Screen and follow the prompt to solve the problem if one exists. 3. Check the connection by removing and reconnecting the cable. 4. Only solar panels with a 11-65V input and DC 10A max current can be connected in parallel. Check if the voltage and current of the connected solar panels are within the range and whether the positive and negative poles are connected correctly. 5. If using a third-party connection cable, the cable length should not exceed 3m. If it is longer than 3m, change it to one with a diameter of 6.5 mm and a wire diameter of 4 mm². 6. Try charging the unit with a car charger. If it works, the solar panel has a connection issue or other problem. If the car charger doesn’t work either, please record a video and send it to support.eu@ecoflow.com for troubleshooting.

Solar Panel Charging Power is Low

If the connected solar panel is standard, the charging power is affected by the light intensity and angle: 1. Place the panels from 9:00 to 15:00 when the sun is at its strongest. Avoid using solar panels on cloudy days or in the shade. 2. The solar panel needs to be placed at an angle of 90° to the sunlight to get the most solar energy. 3. Check to see if Quiet Charging is on in the EcoFlow app.

Short standby time

1. Check the temperature of your environment. If it is in a low-temperature setting, place it somewhere at room temperature. 2. Perform a complete charge and discharge.

Charging a Car Battery

When the car is out of power, you can use a dedicated jumper cable to charge the battery in around 15-20 minutes. Jumper cables are sold separately from a third party. (Note: When charging, do not start the car otherwise, it will cause the battery to malfunction)

Using Solar panels in Series and Parallel

To charge DELTA using multiple solar panels, ensure that the panels are in a series or parallel connection and that the voltage and current are 10-65W DC 10A. It is not recommended to use solar panels with different wattages.

Contact us