Welcome to EcoFlow Support
We're here for you
Recommended Search

We're here for you
Recommended Search
1. Check whether the wheel is stuck in sand, gravels and other soft ground or deep trench. In such a case, you can set the soft foundation as a No-go restricted zone in app, or fill the trench for a flat ground; 2. Check whether the tire is covered by a lot of soils, grass clippings and the like; 3. Check whether any foreign matter is stuck near the tire or the blade disc, and clean the tire and its accessories when necessary. If the wheel is damaged, please contact the after-sales service.
The size of the smallest obstacle identifiable to the robotic lawn mower is 40*40mm (1.58*1.58in). But its color should be significantly different from that of the lawn, and it should be higher than the grass.
The robotic lawn mower can identify the grass through AI and perform the mowing task. If the grass is too high and too dense, the sensor of the robotic lawn mower may identify it as an obstacle, leading to obstacle avoidance action. If you have to mow this zone, please cut the grass to 80mm (3.15in) by using a hand mower before it performs the automatic mowing task.
The spare blades are replaceable, so the user does not need to sharpen them. You are recommended to replace the three spare blades every quarter. Take care to protect your hands when replacing them so as to avoid accidental injury.
1. Please check the spare blades and the height of grass. If the spare blades are blunt, replace them with new ones. If the grass is too high, please cut the grass to expected height with a hand mower first. 2. If the actual height of grass is significantly larger than the set cutting height, the robotic lawn mower needs multiple (>5) cycles to achieve the set mowing height.